| Customization: | Available |
|---|---|
| Installation Type: | Tee Type |
| Sensing Type: | Resistive |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The XC420C is used to control the compressor or fan in the condenser system.
Compressor can be single stage, multi-level or different power.
The pressure or temperature of the LP side of the LP (compressor) or HP side (condenser side) is adjusted to cause the unit pressure
The force or temperature is controlled in a neutral or linear proportional region.
The unique internal programming algorithm can balance the operation time of each compressor and ensure the operation time of each compressor
Between homogeneous.
The controller can convert pressure and temperature display to each other.
The front control panel provides the full operating status of the system: the suction/condensation pressure (temperature) value, the load operation condition, whether it is in
Alarm or check status.
Each load has a corresponding alarm input.Once the alarm is activated, the controller will issue a protective action command to cut off the load in time.
Hot keys can be used to set the parameters quickly when starting up.
Through modbus-rtu protocol, TTL output ports can be provided with centralized monitoring system XWBE300D, XWED500 connection.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
){kind=link}